Ultra Cut II

Our most popular selling stencil material. This premium stencil material is ideal for most applications and is reusable. Ultra Cut II is a clay-coated polyethylene bonded to a removable and repositionable light tack adhesive.

The material is 8.5mil and is a semi-rigid plastic, impervious to inks, paints and stains. Ultra Cut II easily outlasts traditional stencil board and the unique coating not only prevents smears and runs but also produces an extremely high-quality stencil image.

SSB Cut

SSB Cut is a high density, 10mil opaque plastic attached to a heavy backing. SSB Cut is completely impervious to absorption of liquids and is surface coated to prevent runs. This synthetic stencil board can be re-used repeatedly. This is commonly used for stencil wooden crates and cartons – makes for a very durable stencil.

Poly Cut

Commonly used for masking projects where sharp, clear and non-stretched lines are required. Capable of withstanding temperatures up to 300 degrees Fahrenheit, this polyester material produces superior paint masking, holds tightly, yet releases cleanly. Made from 3 mil matte polyester bonded to our ultra-removable/repositionable light-tack adhesive.

Poly Cut SC

Poly Cut SC offers many of the benefits of our standard Poly-Cut but is designed for smaller characters and fine detail cuts (under 6mm).

Polt Cut HT

Our premium high temperature masking material. Is able to withstand temperatures of up to 400 degrees Fahrenheit. This is widely used in the aerospace industry for masking.

Pro Colour Vinyl

This 3.2mil vinyl is ideal for signs, lettering, graphics and decals. The material has a semi-gloss surface and high- performance, permanent adhesive on a strong paper liner. The material has a 5-7 year outdoor durability. It is available in a wide range of colours.

Magnetic Vinyl

With a heavy backing, Mag-Cut™ adhesive holds the magnetic vinyl in place while the cuts are made; when cutting is complete, the stencil is easily peeled from the backing leaving the waste and adhesive on the backing. This leaves you with a clean, adhesive-free magnetic stencil for ferrous metal surfaces. Mag-Cut™ material is an excellent reusable stencil material ideal for railcars, transformers, drums, and large steel containers. Comes on a 6" core.

V Mask

This is an ideal stencil material if you are looking to stencil on irregular surface contours. This highly conformable material is 3.2mil V-Mask produces stencils and masks which can conform to sharp changes in surface contour such as rivets on the skin of an aircraft. It is unique in that it can be used for stenciling with our without transfer tape for true paint masking.